What is udp proxy. Installing and configuring IPTV on Android
Many Internet providers offer their customers an additional service – IPTV television. And if viewing it on a computer or a modern TV doesn’t cause any problems, until recently there was no convenient solution for viewing IPTV on Android tablets or smartphones.
But thanks to a recent application from developer Alexey Sofronov, organize IPTV viewing on Android devicesx it became very simple.
So, if you want to watch IPTV of your Internet provider or TV from any other Internet source on your phone or tablet, we first of all, as you probably already guessed, will need special application. This application is called IPTVcan be downloaded for free from the Android Market Play Store. The program allows you to download a playlist with channels in m3u format and play it using video players installed on the tablet, such as MX Video Player, Daroon Player, Vplayer, etc.
After you installed iPTV application, it needs to be configured:
IPTV setup on Android tablet or smarfone
1. Enter the address of the file with the list of channels.
Go to the program settings and in the “Channel list” section, enter the Internet address of the file with the playlist provided by your provider.
Unfortunately, the program does not yet know how to load a playlist from the memory of a phone or tablet, and if you need to load your own playlist into the application, then you can use, for example, the service Dropbox, and upload the file to the public folder (Public), and then get its address by copying it to the clipboard. To do this, click right click mouse over the file and select the option Copy Public Link:
If you are lucky, and your Wi-Fi router has a built-in UDP proxy, then the settings are almost complete on this, and after returning to the program’s main screen, you can already select a channel from the list and view it on your tablet or smartphone.
If IPTV viewing is accompanied by the fallout of parts of the video stream and the image contains a lot of artifacts, then most likely your router does not know UDP proxy, and in order to watch IPTV we will need to organize our own proxy. This can be done using any computer connected to the router via the LAN connector:
2. Set up a UDP-to-HTTP proxy
For Windows program UDP-to-HTTP proxy can be downloaded at For Linux UDP-to-HTTP proxy can be downloaded from the link
After starting the program, you need to enter into it 2 addresses “UDP multicast interface” and “HTTP server interface”:
In our case, they match and match the IP address. network connectionthrough which the computer is connected to the router. You can find it by right-clicking on the network connection icon, and in Windows 7 select “Status” -u003e “Details”:
In Windows XP, select “Status” -u003e “Support”:
After you have entered the IP address in the UDP-to-HTTP proxy, click the “Save” and “Start” buttons.
3. Enter the UDP proxy settings in the IPTV application:
Go to the application settings menu, and in the UDP Proxy Settings section, enter the IP address and port that were specified in the UDP-to-HTTP proxy program, then select the type of proxy server (Windows or Linux) and click the OK button “.
At this basic program settings are completed. For convenience, you can choose in the “Video Player” item a specific application with which you will watch the video, or the “Selectable by system” item so that you can select the player every time you start watching a new channel.
In order not to run a UDP-to-HTTP proxy on a computer each time, you can start it as a service, and it will automatically start when the computer boots. To do this, click on the “Install” button in the program.
If the UDP-to-HTTP proxy on the computer does not work, make sure that it is not blocked by your antivirus or firewall.
Now many Internet service providers offer IPTV service. This is a new technology that allows for the effective transmission of a television channel through the public Internet.
Unlike traditional forms digital televisionsuch as satellite, terrestrial or cable, IPTV is an online service that operates exclusively on the Internet. And today you will learn how to configure IPTV on Android.
IPTV (from the English Internet Television Protocol) can be called a new generation of television with a technology that does not have limitations on the number of channels and the quality of the content being transmitted. IP TV features may be limited only bandwidth the IPTV operator’s network, as well as the Internet provider, which provides the Internet service to the final subscriber.
Having connected to IP-TV you can watch a TV broadcast not only sitting at home on the couch, but also in any place where you have a device for connecting to the Internet and, actually, connecting to the network.
Television over the Internet protocol can be called a broadcast for one viewer, since it turns out that IPTV is an individual network where everyone can choose content based solely on their desire.
IPTV setup for Android
Watch IP TV different ways. Now we will tell you how to do this through the IPTV application for Android devices, with which you can watch your Internet service provider’s IPTV or other Internet source. Through this program it is possible to download the playlist of the available channels in the m3u format, and then watch the selected channel through the video player installed on the device.
So, we load the application. Installation field, set it up. To do this, open the program, go to “Settings”, select “Channel List” and enter, provided by the provider, the Internet address of the file with the playlist:
So far, unfortunately, the program cannot load a playlist from the memory of an Android device, so if you need to load your own playlist directly into the application, we can use the Dropbox service on the PC for this to download the file to the public library (English). After that, we get its address by copying it to the clipboard. What we are doing for this: right-click on the file and select Copy Public Link:
If your Wi-Fi router is equipped with a built-in UDP proxy, then this is actually the whole setup procedure. That is, returning now to the main screen of the program, we can already choose a channel from the list and watch its broadcast on a smartphone / tablet.
However, it is possible that watching programs on IPTV can be accompanied by problems in the form of an image containing a lot of artifacts or falling out of fragments of a video stream. This most likely means that the router used has no UDP proxy. In this case, we will need to organize your own proxy. We will do this using any computer connected to the router using the LAN connector.
How to configure UDP-to-HTTP proxy
First you need to download the program (for Windows UDP-to-HTTP, for Linux). Now we start the program and enter two addresses: “UDP-multicast interface”, as well as “HTTP-server interface”. We see that they are identical and also coincide with the IP address of the network connection with which the PC is connected to the router. You can find it by right-clicking on the network connection icon, and if you have Windows 7, select: “Status” -u003e “Details”:
If you have Windows XP, then choose: “Status” -u003e “Support”.
After entering the IP-address in the UDP-to-HTTP proxy, click the button “Save” (or “Remember”), and then, “Run”.
Now, in the application, go to the settings menu, in the Proxy Settings section, enter the IP address and port specified in the UDP-to-HTTP proxy, now select the type of proxy server (Linux or Windows) and activate the OK button:
The basic settings of the UDP-to-HTTP proxy application can be considered complete on this. Optionally, for convenience, we can either choose a specific video player to watch the video, or mark “Chosen by the system”, in this case, you can choose player you want when you start watching the channel:
In order not to run the program on a PC each time to view it, you can start it as a service by clicking the “Install” button in UDP-to-HTTP, then it will start automatically when the computer starts.
If the UDP-to-HTTP proxy does not start on the PC, you need to make sure that the application is not blocked by the antivirus or firewall.
How to watch iptv on Android – setting using the OTTPlayer player, watch the video:
Many Internet providers offer their customers an additional service – IPTV television. And if viewing it on a computer or a modern TV doesn’t cause any particular problems, until recently there was no convenient solution for watching IPTV on Android media players.
But thanks to the recently appeared application from the developer Alexey Sofronov, it became very easy to organize IPTV viewing on Android devices.
So, if you want to watch IPTV of your Internet provider or TV from any other Internet source on a media player running Android OS, we first of all, as you probably already guessed, will need a special IPTV application. This application, called IPTV, can be downloaded for free in
The program allows you to download a playlist with channels in m3u format and play it using video players installed on the media player, such as MX Video Player, Daroon Player, Vplayer, etc.
Applications for viewing IPTV on AndroidAt the moment, I know 2A of such applications:
Application features: m3u playlist support playing multicast streams through a UDP proxy (the proxy must be installed in your local network) channel display as a list or grid Channel category support (if there are categories in the playlist, the playlist format is described) TV program support in JTV format (if there is a link to the TV program in the playlist; only ZIP archives are supported) Both applications are similar and have similar functionality, each will choose what they like.
(14 days free after registration). The third option, free public playlists. As a rule, they do not live long, but I can give
On specialized forums there are relevant topics.
Multicast and UnicastLinks in playlists can be unicast and multicast. Unicast start with: // and work, as a rule, on all devices. Multicast links start with udp: // @ and often have problems with them. Reasons why Multicast doesn’t work: Video player does not support udp streams Router does not pass multicast packets The best solution to these problems is to connect via a LAN or UDP proxy. This is a small program that converts UPD streams to Http. UDP proxy is both under Windows and under Linux. But best of all, if your router has such a function. The DD-WRT and Open-WRT firmware exactly have this functionality.
Setting up IPTV on Android media player
Enter the address of the file with the list of channels.
If IPTV viewing is accompanied by falling out of parts of the video stream and the image contains many artifacts, then most likely your router does not know UDP proxy, and in order to watch IPTV we will need to organize our own proxy or connect the media player running Android OS to the router via the LAN connector.
Enter the UDP proxy settings in the IPTV application:Go to the application settings menu, and in the UDP Proxy Settings section, enter the IP address and port that were specified in the UDP-to-HTTP proxy program, then select the type of proxy server (Windows or Linux) and click the OK button “.
Which video player to chooseThe IPTV application for Android is only a “viewer” of the playlist. For video playback, an external video player is responsible. Which player is best for your playlist, you must try. On one player, the picture can brake and crumble, on the other, it can play perfectly. I personally chose for myself
also does an excellent job with this feature.
Using IPTV applications is not particularly comfortable for the following reason: It is not possible while watching a channel, to switch the next channel. We must return to the channel list and re-launch a new one. I hope that the developers of IP-TV in the near future will resolve this issue. By the example of the application
for viewing Russian and Ukrainian TV channels using P2P technology.
Additional Information:Russian interface: Yes
Yesterday everything worked, today not, why? The firmware has not you use an open playlist from the forums, then this is a common phenomenon, because open playlists are often banned by providers when the server load increases. If you watch TV from an Internet provider through a UDP proxy, then make sure that the proxy is up and running and the IP address of the computer with the proxy has not changed. Also, it is possible that the problems are on the side of the provider, to check, open the same playlist on the computer.
What is the difference between a pro version and a regular one? IPTV – there is advertising, the history of playlists is limited to 5 elements. IPTV Pro – no ads, playlists history is limited to 250 elements, it is possible to autostart the application when the device is loaded (useful for consoles running Android OS). In the future, the list of differences may vary.
IPTV is already quite a popular service and many use it on a computer, TV, media player, etc. I want to tell how to run this service on my smartphone or tablet running Android lications for viewing IPTV on Android At the moment I know 2 such applications: IP-TV from QSmart
IPTV from Safronov
Both applications are similar and have similar functionality, each will choose what they like. Personally, I immediately used the application from Safronov, but after it temporarily disappeared from the market, I switched to QSmart and already stayed on it. IPTV playlists One of the most frequent questions is where to get playlists. The most correct options is the playlist of your provider. But, firstly, not all providers provide iPTV service. And secondly, such a playlist will work only in the local network of the provider.
The second option is paid services of third-party providers. But since I have never tried it, I can’t say anything and give references.
Free public playlists. As a rule, they do not live long and the quality leaves much to be desired. On the specialized forum there are relevant topics:
Multicast and Unicast Links in playlists can be unicast and multicast. Reasons why Multicast doesn’t work: Android device does not support Multicast
The player does not support udp streams
Router passes multicast packets
The best solution to these problems is a UDP proxy. The DD-WRT and Open-WRT firmwares definitely have this functionality. Which player to choose The application for android is only a “viewer” playlist. I personally selected MX player Conclusion TV in the phone often helps out when you do something in the kitchen and you want to watch a program or a movie on TV. But its use is not particularly comfortable for the following reasons: Long channel starts
It is not possible while watching a channel, to switch the next channel. I hope that the developers of IP-TV in the near future will resolve this issue.
Most internet providers include tariff plans or offer for a fee to watch streaming television or, as it is often called, IPTV. Usually the instructions for setting up software for Windows, is present on the provider’s website or in documents supplied with the service agreement. But how to set up IPTV on Android is usually not remembered anywhere.
Currently, there are many applications for viewing IPTV on Android:
IPTV (Alexander Sofronov);
All of these programs are designed specifically for streaming television. It should be noted that IPTV viewing is possible on universal players for Android (VLC, MX Player, etc. ), but the convenience of their use for IPTV is inferior to the above programs.
IPTV + VLC setup
All the configuration steps described below are shown on the example of IPTV application from developer Alexander Sofronov and VLC player for Android, but the above applications have similar functionality, and if you want to use another client to watch streaming TV, it will not be difficult to understand it. Also, if there are problems with video playback, it is useful to read the instructions.
Install the IPTV application:
Install the VLC player:
Launch the IPTV application. The program prompts you to add a playlist with channels. Playlist is text file with the extension “. m3u” or “”, containing a list of stream addresses on TV channels. Usually the internet provider provides a link to it. Playlists can be quite easily found on the Internet and download. After adding a playlist, the program will display all the channels it contains.
Click on the desired channel and the IPTV application will launch the VLC player with the selected channel.
At this could be finished, if not for one “but”!
Many providers prefer to stream the stream over the multicast protocol (links like udp: //), since compared to unicast (usually: // protocol), it allows to significantly optimize the occupied channel width, broadcasting the stream to everyone, rather than creating separate sessions for each viewer.
Unfortunately, many Android devices do not support UDP-multicast streams, except for a few models that have udpxy stitched into the firmware.
To transmit IPTV to an Android device, a transcoding system is needed, which will transmit IPTV not by multicast, but by streaming over HTTP.
Modern routers with Linux-based firmware such as DD-WRT and Open-WRT already have a similar system, but if you have a budget router without transcoding support, you can organize your own proxy using a computer connected to common network with an Android device.
For operating rooms windows systems need to download the program UDP-to-HTTP Proxy.
For operating systems Linux family UDP-to-HTTP Proxy server is located.
Configuring UDP-to-HTTP Proxy (Windows)
Setting up the program consists in specifying the IP addresses of the UDP multicast interface and the HTTP server interface. In case your computer and Android device are on the same network, this is the same address and it is equal to the IP address of your PC. Expand the “Multicast Interface” list, it should already contain the IP address of the computer (the last one in the list).
Click on the “Run” button.
The server is running, now go to the settings on your Android device.
Setting up UDP proxy on Android
Open the IPTV application, click on the system button of the device menu and select the option “Settings” from the list.
Click on the option “UDP proxy settings”.
Enter the IP address of the computer running the “UDP-to-HTTP Proxy” server, enter the port number, the default is 7781. Select the type of the proxy server “UDP-to-HTTP Proxy (Windows)” and click OK to save the settings.
Everything! You can test TV playback online on Android.
UDP IPTV to RTSP proxy / Wiki / Home – SourceForge
UDP IPTV to RTSP proxy is a lightweight GNU/Linux daemon which, being installed on a LAN router, provides on-demand access to UDP multicast streams via RTSP and unicast RTP protocols.
Since version 0. 2 the conventional HTTP “continuous download” streaming method is supported.
The server itself does not support streaming of any files, it only can receive incoming multicast streams and retransmit them to interested clients.
The main purpose of the software is to provide simple IPTV service to small office or home ethernet and/or Wi-Fi LANs where upgrading network to handle multicast correctly is not an option.
The software is not intended to handle large scale installations and service clients you don’t trust (like public Internet).
You can get the latest development version from SVN repository. Please note that this is a development version and as a free bonus you can expect more bugs than usually.
Releases considered stable are in Downloads section.
Download the source.
Compile it with GNU make and GCC. This should produce a binary named iptv2rtsp-proxy.
You can copy the binary to any suitable place or keep it with source for testing.
Run server with
$. /iptv2rtsp-proxy -f -s
$. /iptv2rtsp-proxy -f -s 192. 168. 10. 10 -l 5555
Connect by opening an url in your media player:
rtsp192. 0. 1:5555/iptv/224. 50. 50/1234
-f option tells server to stay in foreground, you’ll see diagnostic output in your terminal, press Ctrl+C to terminate.
-s is not an IP address servers listens connections on – it’s used as SDP origin. Server listens on any address.
-l specifies RTSP port. The default is 554, this means that you need a root privileges to start a server, so 5555 is used in the example above.
options -c and -p can be used to specify names of config and pid files.
If for any reason you need to connect to the server and you are behind a NAT make sure your NAT supports RTSP protocol (often they’re not). For Linux you can install NAT helper:. Please note: if using non-standart RTSP port number this port must be specified as nf_conntrack_rtsp option.
HTTP protocol note:
There are essentially no signaling between server and client, almost no control over TCP behavior, all this makes error handling and recovery extremely difficult.
If server detects that it can not send data to the client in more or less reliable way, the connection will be closed.
The server has fixed-sized buffer for streamed data, this buffer will overflow quickly if client can not receive (or decode) data. Overflowed buffer can make streaming data severely damaged, thus preventing client to decode it, making the issue yet worse leaving no chance to recover.
Some clients handle network continuous downloads as files, this is wrong. See for details.
In short: server sends data by servers’ clock, there’s no way to change this. Correct behavior for client would be to receive and process all data same moment it’s available. Alternative to this is receiving data by clients’ clock. Without proper synchronization (and there’re usually none) it is possible socket buffers to overflow (if send rate is higher than receive or stream is damaged) effectively stalling all transmission for this client.
The software currently implements only a very limited subset of features described in these documents:
RFC3550 – RTP: A Transport Protocol for Real-Time Applications
RFC2326 – Real Time Streaming Protocol (RTSP)
RFC2327 – SDP: Session Description Protocol
The goal is not to implement these completely, only parts that are required by popular software to function properly.
RTSP protocol supports PAUSE requests, but this server supposed to work with “live” streams only and does not have any PVR functionality. While it’s possible to “pause” streaming, it’s impossible to resume from the point it was paused. After resuming, audio/video decoders will act as if there were a big packet loss.
It is possible to implement FEC schemes for RTP, but it looks like there no clients supporting FEC now.
VLC Media Player
1. 0, 2. 0
Infomir MAG250 IPTV STB
0. 2. 12
0. 5. 9
Elecard RTSP NetSource(3)
Client doesn’t send PAUSE requests. Pause is emulated by a client and streaming continues.
While paused client sends neither RTCP reports, nor RTSP requests to prevent session timeout. As a result session timeouts and there’s no way to determine if it’s still alive.
Part of “Elecard MPEG-2 PlugIn for WMP” and possibly other software. Being a DirectShow filter this product allows Windows Media Player and other players to understand RTSP protocol.
Why do I need proxies for IPTV
UDP proxy converts IPTV UDP multicast traffic to TCP unicast. This allows you to more comfortably view IPTV using Wi-Fi on smart TVs, tablets, smartphones, and even game consoles.
This program has 2 main purposes:
transmit IPTV to the middle of a small local area network based on a non-server version of Windows;
constantly transmit IPTV over Wi-Fi in the form of HTTP-traffic.
Do you know what to choose: paid or free proxies?
Configure UDP-to-HTTP Proxies (Windows)
The essence of the configuration is to specify the IP interface of the UDP multicast and the HTTP server interface. If the Android device and the computer are on the same network, the address will be the same and equal to the IP address of the PC.
Go to the UDP-to-HTTP Proxy 2. 7. 5. 0 settings. Open the “HTTP-Server Interface” list, find the IP address of the computer (it should be the last in the list):
Press the “Start” button:
Setting up UDP proxy on Android
In the IPTV application, open menu, then the “Settings”. Click “UDP proxy settings”:
Enter the IP of the PC with UDP-to-HTTP Proxy already running, enter the port number. Select the type of proxy “UDP-to-HTTP Proxy (Windows)” and press the “OK” button to save the settings:
After all the recommendations given in the instructions, you can proceed to play TV online on Android.