How To Shut Down Someone’s Ip Address

H

How to remotely shutdown another Windows computer

How to remotely shutdown another Windows computer

Updated: 12/31/2020 by
Users of Microsoft Windows version 2000 and later can remotely shut down another computer in their network with the shutdown command.
To start the GUI version of this command, follow these steps:
Windows 8 and 10 users
Press the Windows key+X on the keyboard to open the Power User menu.
Select the Search option in the menu.
In the Search text box, type shutdown -i and press Enter.
Windows Vista and 7 users
Click the Start button.
In the Search text box at the bottom of the Start menu, type shutdown -i and press Enter.
Windows 2000 and XP users
Click the Start button, then select the Run option.
In the Run window, type shutdown -i and press Enter.
After running this command, you’ll see a dialog window shown in the following example.
As you can see in the example above, you’ll have different options to choose from in the Remote Shutdown dialog.
TipYou need administrative privileges to access and shut down the computer remotely to complete the following steps.
Specify the name or IP address of the computer you want to shut down by clicking the Add button.
Select Shutdown from the list of values under “What do you want these computers to do”.
If you want to warn the user of the shutdown before it occurs, keep the check box labeled Warn users of the action checked.
In the Shutdown Event Tracker section, choose the option that you want the Event Log to show when the computer shuts down and enter a comment.
Click OK to initiate the shutdown of the remote computer.
For Windows Home edition computers
NoteThe Windows Resource Kit is no longer available for download from Microsoft. The following instructions work only for a legacy Windows computer that already has the Resource Kit installed.
If the remote computer you’re attempting to shut down is running a Home edition of Microsoft Windows, you need to enable guest remote shutdown privileges before the above steps work. To do this, follow these steps.
From the Microsoft Windows Resource Kit (required), copy the file from the “Program Files\Windows Resource Kits\Tools” directory into the “Windows\System32” directory.
After the file is copied, open a command prompt window by clicking Start, Run, and typing cmd and pressing Enter. At the prompt, type the following commands exactly as you see them here (unless your Windows directory is in a different path).
cd\windows\system32NtRights -u Guest +r SeRemoteShutdownPrivilegeNtRights -u Guest +r SeShutdownPrivilege
If successful, after typing each of the above NtRights commands, a success message appears. Once this task is completed, exit the command prompt window and restart your computer.
Once the above steps are completed, you can remotely shutdown that computer from another Windows computer.
Unable to get remote shutdown to work
Inoperable remote shutdown could be caused by any of following reasons.
The domain administrator has group policies in place to prevent remote shutdown.
Remote administration or the $ADMIN share is disabled.
You’re logged in to an account that does not have administrative privileges.
Alternative solutions
If you’re still unable to remotely shutdown a computer or are using an earlier version of Windows, try PsShutdown, which is part of the free SysInternals Suite.
How to Find out IP addresses and shut down computers

How to Find out IP addresses and shut down computers

In this video we learn how find out IP addresses of websites and shut down the computers with those IP addresses. To do this click “start”, then “run” then type command prompt. In the command prompt type “tracert website” (example tracrt) then hit enter. Various IP addresses should be returned. Then in the command prompt type “shutdown-i” and hit enter, this opens the remote shutdown dialogue. In this dialogue you can add the IP addresses and adjust the various other options then click “OK. ” The dialogue will ask you if you want to alert the user then after some wait time the process will be complete.
Click through to watch this video on
Keep Your Connection Secure Without a Monthly Bill. Get a lifetime subscription to VPN Unlimited for all your devices with a one-time purchase from the new Gadget Hacks Shop, and watch Hulu or Netflix without regional restrictions, increase security when browsing on public networks, and Now (80% off) >Other worthwhile deals to check out:41% off a home Wi-Fi analyzer 98% off a learn to code bundle 98% off an accounting bootcamp 59% off the XSplit VCam video background editor
How to Shut Down or Restart Another Computer Using CMD

How to Shut Down or Restart Another Computer Using CMD

Download Article
Command Prompt is a feature of Windows that provides an entry point for typing MS‑DOS (Microsoft Disk Operating System) commands and other computer commands. You can use the Command Prompt to remotely shutdown or restart another computer. You can also access the Remote Shutdown Dialog Window through the Command Prompt. In order to remotely shutdown another computer, you must have administrative access to the target computer. The target computer must also have file and printer sharing turned on.
1
Click the Start button. It’s the button with the Windows icon in the lower-left corner.
2Type cmd. This searches for the command prompt and displays it at the top of the Windows Start menu.
3Right-click Command Prompt. It has an icon that resembles a black screen with a white prompt. Right-clicking this icon displays a menu to the right of the Command Prompt icon.
4
Click Run as administrator. This opens the Command Prompt with administrative privileges.
You must be signed in to Windows using an administrative account in order to run the Command Prompt as an administrator.
5
Type shutdown in the Command Prompt. This is the first line to shut down a computer.
To see a complete list of shutdown commands, type shutdown /? in the Command Prompt.
6Type m \\computername. Type this one space after “shutdown” on the same line. Replace “computername” with the actual name of the target computer.
7Type /s or /r one space after the computer name. If you want to shut down the target computer type “/s” one space after the computer name. To restart the computer, type “/r” one space after the computer name.
8
Type /f. Type this one space after “/s” or “/r”. This forces all programs to close on the remote computer.
Note: The user may lose unsaved work if programs are forced to close without saving. Continue to the next step to learn how to alert the user and give them a few seconds to save their work before the computer or shuts down or restarts.
The entire command so far should look something similar to this: shutdown \\workspace1 /r /f. Press ↵ Enter to restart the computer immediately. Continue to the next step to add a timer with a comment.
9Type /c. This goes one space after “/f” on the same line. This allows to you send a message to the target computer.
10Type a message in quotation marks. This goes one space after “/c”. The message should alert the user of the remote computer that the computer will shutdown. For example, you could type “This computer will restart. Please save all work”. Make sure the message is in quotation marks (” “).
11Type /t followed by the number of seconds. This goes one space after the message in the previous step. This is how you can give the user a few seconds to save their work before the computer shuts down. For example, /t 60 would give the user sixty seconds to save their work before their computer shuts down or restarts.
12
Press ↵ Enter. This executes the command. The entire command should look something similar to this: shutdown m\\workspace1 /r /f /c “This computer will restart in 60 seconds. Please save all work. ” /t 60.
If you receive a message that says Access Denied, make sure you are signed in to an administrative account and that you have administrative access to the target computer. See Method 3 to learn how to enable File and Printer Sharing on both computers and allow it through the Windows Firewall.
If you are unable to connect to the registry on the target computer, see Method 4 to learn how to edit the registry on the target computer.
EXPERT TIP Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years. Luigi Oppido Computer & Tech Specialist Expert Warning: If you’re shutting down a computer from the command prompt, the computer will probably close all of its processes before it shuts down. However, if you run a shutdown command from a PowerShell, it could supersede any other safeties and shut everything down immediately, which could cause you to lose data.
5Type shutdown -i and press ↵ Enter. This opens the Remote Shutdown Dialog window.
6Click Add. It’s to the right of the “Computers” box.
7
Type the IP address of the target computer(s) and click Ok. The target computer is the computer you want to shut down or restart. Type the IP address of that computer in the “Add Computers” window, and click Ok.
If you are not sure what the Private IP address is for the target computer, you can find it using that computer.
8Choose if you want to shut down or restart a computer. Use the drop-down menu below “What do you want these computers to do” to select “Shutdown” or “Restart”.
9Click the checkbox next to “Warn users of action” (Optional). This allows you to set a timer for when the computer(s) will shutdown.
10Type the number of seconds until the computer(s) shutdown (Optional). Type a number in the box in the sentence “Display warning for [] seconds”. This sets a timer for when the computer(s) shutdown.
11Click the checkbox next to “Planned” (Optional). This allows you to create an event tracker for the remote shutdown or restart.
12Select a reason for the shutdown (Optional). Use the drop-down menu below “Options” to select the best reason for the shutdown/restart. For example, “Hardware: Maintenance (Planned)”.
13Type a comment (Optional). This will be displayed on the target computer. For example, “This computer will shut down in 60 seconds. ”
14
Click Ok. This executes the Shutdown or Restart.
Open the Control Panel. Use the following steps to open the Control Panel.
Click the Windows Start menu.
Type Control Panel.
Click the Control Panel.
2
Click Network and Internet. It’s the green text next to an icon that resembles two computer screens in front of a globe.
Skip to the next step if you don’t see this option.
3Click Network and Sharing Center. It’s next to an icon that resembles four connected computers
4Click Change advanced sharing settings. It’s at the bottom of the sidebar to the left.
5Click the circular button next to Turn on network discovery. This enables network discovery.
6Click the radial button next to Turn on file and printer sharing. This enables file and printer sharing.
7Click Save Changes. It’s in the lower-right corner.
8Click Network and Internet. It’s in the address bar at the top of the Control Panel. This returns to the Network and Internet menu of the Control Panel.
9Click System and Security. It’s in the sidebar menu to the left.
10Click Allow an app through Windows Firewall. It’s the second option below “Windows Defender Firewall”.
11Click the checkbox next to “File and Printer Sharing”. It’s in the list of allowed apps and features.
12Click the checkbox below “Private”. It’s to the right of “File and Printer Sharing” in the list of allowed apps and features.
13Click Ok. It’s at the bottom of the Control Panel window. This saves and applies the changes you have made.
1Click the Start button. It’s the button with the Windows icon in the lower-left corner. On newer versions of Windows, administrative privileges are often stripped when trying to access a computer remotely. You can fix this by editing the registry.
Type regedit. This displays the regedit (Registry Editor) app.
Warning: Editing or deleting items in the Registry Editor can cause permanent damage to your operating system. Proceed at your own risk!
3Click Regedit. This opens the Registry Editor app.
Navigate to the “System” folder in “Policies”. You can use the folders in the sidebar to the left to navigate in the Registry editor. Use the following steps to navigate to the “System” folder in “Policies”:
Double-click the HKEY_LOCAL_MACHINE folder.
Double-click the SOFTWARE folder.
Double-click the Microsoft folder.
Double-click the Windows folder.
Double-click the CurrentVersion folder.
Double-click the Policies folder.
Double-click the System folder.
Create a new DWORD value. Use the following steps to create a new DWORD value in the “System” folder.
Right-click a black spot in the window to the right of the folders in the sidebar.
Hover over New.
Click DWORD (32-bit) Value.
6Name the new DWORD value “LocalAccountTokenFilterPolicy”. When you create a new DWORD value, the name will be highlighted blue. Immediately type “LocalAccountTokenFilterPolicy” to rename the value.
7Right-click LocalAccountTokenFilterPolicy. This displays a menu to the right of the value.
8Click Modify. This opens an editor window for the DWORD value.
9Change the value data to “1”. Use the box below “value data” to change the value from “0” to “1”.
10Click Ok. This saves the DWORD value. You can now close the registry editor. [1]
Add New Question
Question
How do I shut down or restart another computer using CMD if the PC has no name?
Type in the IP address instead of the name.
I want to unlock my phone. Is it possible using the above procedure?
XXWolfBane YT
Community Answer
It is not possible to unlock your phone with the procedure above.
Can I use -s to cancel a shutdown in CMD?
No, instead of -s, try using the command “shutdown -a” (without the quotation marks). This will cancel your shutdown.
How do I shutdown my computer using CMD?
Use the command ‘shutdown /s’ for shutdown and ‘shutdown /r’ for restart. You can also use the command ‘shutdown’ by itself to see more options (log off, hibernate, etc. )
After that process it says “Access is denied”. What do I do?
You might not have administrator access to that computer. If you’re trying to shut down your own computer, then run CMD as administrator.
How do I get an administrator access to a computer that I can’t shut down?
Try using \ipaddressipc$ “” /user:administrator is the code you use to gain access to the computer as administrator.
Why if I try it and fail?
Try again and make sure that you have typed all commands correctly without quotations (” “).
How do I turn on my computer again after shutting it down using CMD?
You turn it on the normal way (you can’t do this remotely because it has gone offline).
What do I do if it’s saying “access denied” when trying to shut down a computer using CMD?
You need to run as administrator; if you don’t have administrator access, then you can’t.
How do I know what the IP address is?
Open CMD and type ipconfig, then look for IP Address or IPv4 Address, that will be the IP address.
Show more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Before doing this, you should know their IP address.
Type shutdown /? in the Command Prompt to see a complete list of shut down commands.
It is only for educational purposes only; don’t misuse it.
About This Article
Article SummaryX1. Open the Windows Start menu.
2. Type CMD.
3. Double-click the Command Prompt.
4. Type shutdown.
5. Type \\ followed by the name of the target computer.
6. Type /s to shutdown or /r to restart.
7. Type /f.
8. Type /c.
9. Type a shutdown alert message in quotation marks.
10. Type /t.
11. Type the number of seconds until the shut down or restart happens.
12. Press the Enter key.
Did this summary help you?
Thanks to all authors for creating a page that has been read 361, 095 times.
Is this article up to date?

Frequently Asked Questions about how to shut down someone’s ip address

How do I shutdown an IP address?

To do this click “start”, then “run” then type command prompt. In the command prompt type “tracert website” (example tracrt Google.com) then hit enter. Various IP addresses should be returned. Then in the command prompt type “shutdown-i” and hit enter, this opens the remote shutdown dialogue.Apr 18, 2010

How can I shutdown someone else’s computer?

If you want to shut down the target computer type “/s” one space after the computer name. To restart the computer, type “/r” one space after the computer name.

Can you clear an IP address?

Type “ipconfig /release all” at the prompt. Press “Enter” on your keyboard. This will erase your old IP address.

About the author

proxyreview

If you 're a SEO / IM geek like us then you'll love our updates and our website. Follow us for the latest news in the world of web automation tools & proxy servers!

By proxyreview

Recent Posts

Useful Tools